Strand Multi Cording

At Die Cut Machines your source for Die Cutting Machines and Crafting Supplies we hope the Strand Multi Cording products and information here meets your needs.

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
CURL error code = 28. (Operation timed out after 20001 milliseconds with 0 bytes received)

How do you extend the location of an outlet to another location by using an extension cord?

I have bought all the boxes and switches I need, but basically I'm trying to extend the location of an outlet by disconnecting the outlet (in the wall), cutting the ends of an extension cord, and somehow connecting the wires from the extension cord to a new outlet in a different location. I just don't know which part of the extension cord goes where. Links would be great! Thanks!

It is against the building and fire code. NEVER use an extension cord to extend permanent wire. The extension cords are made of multi-strand wire, which are hundreds of very thin wires bound together while permanent wiring is made of a single solid strand. These have different physical properties on how they handle the resistance and associated heat.
You can go buy a 25 ft roll of "Romex" 12 or 14 gauge "2 wire" and use that then you are in code. Larger the gage thinner the wire so if you are not running high drain items, the thinner wire is easier to work with. "2 wire" indicates the number of conductive wires then the ground.
A couple of things to remember:
1) Don't forget to cut off the breaker BEFORE you start..

2) Wherever you make the extension, you have to leave accessible for repair without tearing out the wall so you will just place a solid face plate over the old socket plate once the job is done.
3) Using the romex wire, run it under/through/over... the walls to where the new box is.. You should use electrical staples to hold the wire according to the building code in your area (3-5 feet generally).
4) Connect up the wire to the new outlet following the instructions to connect the black to the brass looking screw and the white to the silver looking screw. Screw the socket into the new box. Be sure to leave 6 inches of wire
5) Turn the power back on...

MAKE YOUR OWN Jewelry and discover your creative side: GETTING STARTED

Stems and jewelry making is a hobby that is fun, rewarding and practice. Not that you get to explore their creative side, you can create unique pieces of its kind, that you can wear or give as a gift. Pearls is a simple hobby to start and you can start immediately, without having a series of classes or spending an excessive amount of money on specialized equipment. Stems and jewelry making is therapeutic and is an excellent opportunity to bond with a brother, daughter or friend. Here is some basic information to help you familiarize yourself with the fans and the basic things you need to start.

The good news is that you can start slowly, to buy what you need and learn to fly. You can start with a few simple things and build your collection supplies the experience they acquire. Most of the basic materials needed to start are: beads, a model of the card accounts you to design and visualize your jewelry before stringing, carpet accounts for damping surface plugs work accounts that clip at one end of the strings grains do not fall while you work, the results and materials of rope. If you use an extension cord, everything you need to complete their work is a node and care a little super glue to add more strength to the node. If you want to attach to bracelets and necklaces, brooches, then you just start flexible thread (instead to pull the cable), a crimping tool and a cutter. Other tools that can be useful, but perhaps not necessary, unless you do the work of the wire are flat nose pliers, needle nose pliers round clips and other specialties that are available for purchase individually or inserts.

When you choose your hardware threads, you'll find many options. Its choice of material lies is important in many ways it can affect the appearance of design as well as the strength and structure. One of the more common starting material is flexible threading. It is mainly made of steel "stainless mini" cable coated with nylon. line wire flexible can be found in various widths and colors offered by different brands such as Soft Flex, Flex-Rite and Beadalon. Flexibility and strength increases with an account top line. lines have components 7-49 Strand. Crimp Beads and a crimping tool is required to use such material. As more and more involved your premises for records for the best selection of beads and supplies. It will also provide better Selection of results such as staples (single or multi-son), the lever closures, rings, cones, handles, connectors and other components. You find also a variety of beads, chains, stringing materials and other supplies useful. Your local store pearl will also be able to provide advice and offer specialized courses for beginners, intermediate and advanced jewelry.

If you prefer to teach at your library and a local library will have books and magazines that contain instructions and detailed illustrations. The Internet is also a valuable resource for Super information.

About the Author

Joyce Lee is a jewelry designer with over 15 years of experience in jewelry design and production. Ms. Lee also enjoys teaching jewelry making classes to children and adults of all ages. Visit for project ideas, instructions, and materials.

Additional ideas & tips can be found at Bead Bee's blog.

Joyce's artisan jewelry can be seen at Bead Bee Boutique


Comments are closed.